特點：本設備符合MIL STD，GB，JIS，JEDEC，IEC等測試規範；引進國外技術，關鍵部件和材料進口（空氣彈簧、環氧樹脂、不銹鋼板、減震橡膠等），產品出口歐美等海外國家。內置支撐空氣彈簧承載，承載力大；耳軸採用空氣彈簧隔振，直線軸承導向；利用有限元分析製造的無骨架動圈，更有效地提高動圈共振頻率的同時減輕運動部件品質。台體上裝有應急停機開關及空氣彈簧氣壓調節伐、氣壓錶，方便用戶試驗；台體採用汽車烤漆技術（金屬漆）——噴漆，具有長期防磨防銹作用。
規格：溫度範圍：-70℃～150℃
溫度控制穩定度：±0.5℃
溫度偏差：±2℃
升溫溫變範圍：-40℃→125℃約33分鐘、此溫度範圍可做線性升溫速度為1℃～3℃（帶載42Kg或300W有源負載）、最大升溫速率為5℃/min（全程平均）
降溫溫變範圍：125℃→ -40℃約33分鐘、此溫度範圍可做線性升溫速度為1℃～3℃（帶載42Kg或300W有源負載）、最大降溫速率為5℃/min（全程平均）
濕度範圍：20%～98%RH
濕度控制穩定度：±2%RH
濕度分佈均勻度：±3%RH（空載）±5%RH（空載）
Features:this device complies with mil STD, GB, JIS, JEDEC, such as IEC testspecification; the introduction of foreign technology, key components andmaterials imported (air spring, epoxy resin, stainless steel plate, rubbershock absorber, etc.), products exported to Europe, America and other overseascountries. Built-in support for air spring bearing and bearing capacity; earshaft of the air spring vibration isolation, linear guide bearing; made by useof finite element analysis without moving coil framework and more effectiveimprove dynamic resonance frequency and reduce the mass of moving parts.Platform equipped with emergency stop switch and air spring pressure adjustingvalve, pressure gauge, convenient user trials; platform using automotive painttechnology (metallic paint), paint, with long term Anti grinding rust role.
Specifications:Temperaturerange: -70℃～150℃
Temperature control stability: ±0.5℃
Temperature deviation: ±2℃
Heating temperature range: -40℃→125℃ about 33minutes, the temperature range can be linear heating up speed is 1℃～3℃ (with 42Kgor 300W active load), the maximum heating rate is 5℃/min (Full average)
Cooling temperature range: 125℃→ -40℃ about 33minutes, the temperature range can be linear heating up speed is 1℃～3℃ (with 42Kgor 300W active load) and maximum cooling rate is 5℃/min (Full average)
Humidity range: 20% ~ 98%RH
Humidity control stability: ±2%RH
Humidity distribution uniformity: ±3%RH(no-load) ±5%RH(no load)
